|
|
| ECOFLUX
IFM 1010 K IFM 1080 K
|
AQUAFLUX
010 K 080 k
|
ALTOFLUX
IFM 4010 K IFM 4080 K
|
|||||||||||||||||||||
|
 |
 |
 |
||||||||||||||||||||
| .
Characterization |
.
|
.
. |
.
|
||||||||||||||||||||
| Signal converter | IFC 010 K or IFC 090 K | IFC 010 K or IFC 090 K | IFC 010 K or IFC 090 K | ||||||||||||||||||||
| Electrical conductivity |  5µS/cm
(water 20 µS/cm) |
20
µS/cm |
5
µS/cm (water 20 µS/cm) |
||||||||||||||||||||
| Full scale range
(0.3-12m/s) (1-40 ft/s) |
85 liter/h - 760 m3/h 0.3 - 3 360 US Gal/min |
85 liter/h - 33 000 m3/h 0.3 - 156 000 US Gal/min |
85 liter/h - 33 000 m3/h 0.3 - 156 000 US Gal/min |
||||||||||||||||||||
| Meter size | DN 10 - 150 and 3/8" - 6" | DN 10 - 1000 and 3/8" - 40" | DN 10 - 1000 and 3/8" - 40" | ||||||||||||||||||||
| Pressure rating | up to 16 bar/230 psig | up to 40 bar/580 psig | up to 40 bar/580 psig | ||||||||||||||||||||
| Product temperature | - 25 to + 120ºC/- 13 to + 248ºF | - 5 to + 90 ºC/+ 23 to + 194ºF | - 60 to + 140 ºC/- 75 to + 284ºF | ||||||||||||||||||||
| Protection category | IP 67, equivalent to NEMA 6 | IP 67, equivalent to NEMA 6 | IP 67, equivalent to NEMA 6 | ||||||||||||||||||||
| Materials
(others on request) electrodes |
Teflon®PFA
Hastelloy C4 |
DN
25 / 1" hard rubber
DN 20 / ¾" Teflon®
PTFE
Hastelloy C4 |
Teflon® PFA, Teflon®
PTFE ETFE (Tefzel) Hastelloy C4, platinum, titanium stainless steel 1.4571/316 Ti. |
||||||||||||||||||||
| Hazardous Euro.
Std.
duty versions*FM-Factory Mutual |
no
no |
no no |
EEx dqe or dq ib IIC T3
. . . T6 Class I, II, III, Div 1, 2** |
||||||||||||||||||||
| Fields of application | |||||||||||||||||||||||
| Industry | environmental engineering water and sewage, agriculture, batching of fertilizers and liquids feeds | environmental
engineering, water and sewage |
the "workhorse" for water, sewage and waste water, chemicals, paper, cellulose, ore dressing | ||||||||||||||||||||
| Abrasion resistance | very good | higher than required for the applications in question | dependent on liner material, very high with Teflon® PFA | ||||||||||||||||||||
| Chemical resistance
of liner ...with alakis, eg. NaOH |
NaOH up to 70 % at 20ºC/68ºF | NaOH up to 50 % at 20 ºC/68 ºF | all concentrations with Teflon® PFA or PTFE liners | ||||||||||||||||||||
| ...with acids, eg. HNO3 | HNO3 up to 65 % at 20 ºC/68 ºF | HNO3 up to 5 % at 20 ºC/68 ºF | all concentations with Teflon® PFA or PTFE liners | ||||||||||||||||||||
| (limited by electrode material) | (select materials for grounding rings and gaskets for process compatibility) |
back | home page  |
| April 20, 1998 |
